Although the 利来w66老牌ag旗舰 high-definition display is monochromatic, the 利来w66老牌ag旗舰s of each color still have a half-wave width of about 30 to 50 nm, so the color saturation is limited. The colorful nature is so beautiful, unfortunately the existing 利来w66老牌ag旗舰 display can not fully reproduce this beautiful scenery.
First, the allocation of white field color coordinates:
White field color coordinate modulation is one of the most basic technologies for full color 利来w66老牌ag旗舰 display. However, in the mid-1990s, due to the lack of industry standards and basic testing methods, the white-field color coordinates were usually determined by the human eye and by feeling, resulting in the arbitrariness of severe color cast and white-field color temperature. With the promulgation of industry standards and the complete testing methods, many manufacturers have begun to regulate the full color screen color matching process. However, some manufacturers still use the theoretical guidance of lack of color matching, often at the expense of the gray level of some primary colors to match the hundred field color coordinates, the overall performance is not improved.
In summary, we mainly discuss three aspects:
1.How to improve the chroma uniformity of led HD display;
2.How to expand the color gamut and restore more natural colors;
3.How to improve the color reproduction degree of the led display;
There are a wide range of applications in various industries, and there are different requirements for the primary wavelength of 利来w66老牌ag旗舰s in different applications. The choice of 利来w66老牌ag旗舰 primary color wavelength is to achieve good visual effects, and some to meet people's habits, and some It is also the regulation of industry standards, national standards and even international standards.
The above-mentioned various color processing techniques are all interrelated in the specific implementation, and some aspects are not even compatible with fish and bear's paw. The integrated 利来w66老牌ag旗舰 display screen also needs to perform brightness uniformity correction, gray scale nonlinear transformation, noise reduction processing, image enhancement processing, dynamic pixel processing, etc., and the whole signal processing flow is very complicated. Therefore, we must comprehensively weigh the performance from the perspective of the system, grasp the order of each treatment, and increase the depth of signal processing, in order to make the 利来w66老牌ag旗舰 full-color display show a colorful, colorful and wonderful world.
For example, the choice of the wavelength of the green tube in the full-color 利来w66老牌ag旗舰 display; in the early days, the yellow-green 利来w66老牌ag旗舰 with a wavelength of 570 nm was generally used. Although the cost is low, the color gamut of the display is small, the color reproduction is poor, and the brightness is low. After selecting a pure green tube with a wavelength of 525nm, the color gamut of the display has nearly doubled, and the color reproduction degree has been greatly improved, which greatly improves the visual effect of the display.
Second, 3+2 multi-primary color processing method:
In recent years, in the field of flat panel display, I am keen to discuss 3+3 multi-primary color display (red, green, blue, yellow, blue, purple) to expand the color gamut and reproduce more abundant natural colors. So, can the 利来w66老牌ag旗舰 display achieve 3+3 multi-primary display?
We know that in the visible range, yellow and blue are monochromatic, and we have high-yellow yellow and cyan 利来w66老牌ag旗舰s. The purple color is the complex color, and the single-chip purple 利来w66老牌ag旗舰 does not exist. Although we can not achieve red, green, blue plus yellow, blue, purple 3 + 3 multi-color led display. However, it is feasible to study red, green, blue, yellow, and blue 3+2 multi-color 利来w66老牌ag旗舰 display screens. Because of the large number of high-saturation yellows and cyan in nature, the study has some value.
In the current various TV standards, the video source has only three primary colors of red, green and blue, and no yellow or blue. Then, how to display the terminal yellow and blue primary colors?
In fact, when determining the driving strength of the primary colors of yellow and cyan; we follow the following three principles:
1.The purpose of increasing the primary colors of yellow and cyan is to expand the color gamut and thereby increase the color saturation. The overall brightness value cannot be changed;
2.Do not change the color tone while increasing the color saturation;
3.Centered on D65; with the RYGCB gamut boundary as the endpoint, linear expansion at each point in the gamut.
Under the guidance of the above three principles: According to the gravity center law, we can find 3+2 multi-primary chromaticity processing methods. However, in order to truly realize the 3+2 multi-primary full-color screen, we have to overcome the difficulties of insufficient brightness of yellow and cyan 利来w66老牌ag旗舰s;
Third, chroma uniformity processing:
The problem of uniformity of chroma of full-color led display has always been a big problem for the industry. It is generally believed that the brightness of the 利来w66老牌ag旗舰 is not uniform and can be corrected by single point to improve the brightness uniformity. The chromaticity unevenness cannot be corrected, and can only be improved by subdividing and filtering the 利来w66老牌ag旗舰 color coordinates.
Fourth, color reproduction processing:
The birth of pure blue and pure green 利来w66老牌ag旗舰s has made the full-color 利来w66老牌ag旗舰 display popular in the industry for its wide color gamut and high brightness. However, due to the large deviation of the chromaticity coordinates of the red, green and blue 利来w66老牌ag旗舰s from the chromaticity coordinates of the PAL TV red, green and blue (see Table 1), the color reproduction of the 利来w66老牌ag旗舰 full color screen is poor. Especially when expressing the skin color of a person, there is a visually significant deviation. As a result, color reproduction processing technology came into being. Here I recommend two methods of color reproduction:
1.Correction is only appropriate for the most sensitive skin color gamut of the human eye; color gamuts that are not sensitive enough to other human eyes reduce the original color saturation as much as possible. This is done to achieve a balance between color reproduction and color saturation.
2.The color coordinate transformation of the red, green and blue primary color 利来w66老牌ag旗舰s is performed, so that the three primary color coordinates between the 利来w66老牌ag旗舰 and the PAL television are as close as possible, thereby greatly improving the color reproduction degree of the 利来w66老牌ag旗舰 display. However, this method greatly reduces the color gamut range of the led display, and the color saturation of the picture is greatly reduced.
Fifth, the choice of the primary color wavelength:
Led display screens are getting higher and higher with people's requirements for 利来w66老牌ag旗舰 display screens. Only subdividing and screening 利来w66老牌ag旗舰 color coordinates can not satisfy people's critical eye, and comprehensive correction processing is performed on the display screen to make chromaticity uniformity. Improvements are achievable.
We found that even the same brand of the international first brand 利来w66老牌ag旗舰 has large wavelength deviation and color saturation deviation, and the deviation range greatly exceeds the human eye's threshold for the identification of green chromatic aberration. Therefore, it is important to perform chromaticity uniformity correction. meaningful.
In the CIE1931 chromaticity diagram, by gravity center