Your current location::Home >> News >> Industry News

From single RGB to COB, small pitch 利来w66老牌ag旗舰s "full bloom"

2019-02-28 119

      At the beginning of the new year, the appearance of "COB small-pitch 利来w66老牌ag旗舰" has brought a refreshing look to the industry, breaking through the competition of manufacturers who are "smaller and smaller".


      This also means that for the entire 利来w66老牌ag旗舰 display market, 利来w66老牌ag旗舰 products are no longer divided by different pitches. Different packaging technologies have become another key to distinguish and select 利来w66老牌ag旗舰 products.


  Enter the indoor market, the advantages of small pitch 利来w66老牌ag旗舰

  At the beginning of the 利来w66老牌ag旗舰 products, due to their inherent characteristics such as high brightness and beautiful colors, they are stable in the outdoor market, but rarely in the indoor field. However, with the development of technology, the appearance of small-pitch 利来w66老牌ag旗舰s (below P3.0) has made 利来w66老牌ag旗舰 indoor applications a reality.


图片9.png

  Small pitch 利来w66老牌ag旗舰 products

      From a technical point of view, although the current small-pitch 利来w66老牌ag旗舰s still have problems such as long-term, continuous viewing and vertigo in indoor applications, it is undeniable and has its inherent advantages.


      The first thing to do is "seamless". From the perspective of visual effects, small-pitch 利来w66老牌ag旗舰s can be seamlessly displayed on the whole screen, and the picture is more complete.

      In addition, for indoor large-screen projects, space and area are often limited, while small-pitch 利来w66老牌ag旗舰s are light and thin, and the thickness of the screen is less than 100mm, which is more space-saving.


      Moreover, the small pitch 利来w66老牌ag旗舰 has high brightness, and its brightness can be arbitrarily adjusted between 350 and 2000 cd/m2, and the adaptability to ambient light is stronger.

      Finally, the small-pitch 利来w66老牌ag旗舰 has a wide color gamut and a color gamut of 114% NTSC. The color is more beautiful, especially suitable for indoor scenes such as auditoriums, demonstration halls, and TV studios.


   From SMD to COB, the leap of 利来w66老牌ag旗舰 technology development   

      Previously, for users, the choice of small pitch 利来w66老牌ag旗舰s was more of a choice between different pitches, while the pitch primarily affected the resolution per unit area for small pitch 利来w66老牌ag旗舰s.


   At present, compared with different packaging technologies, COB small-pitch 利来w66老牌ag旗舰s are greatly improved for SMD small-pitch 利来w66老牌ag旗舰s, whether from technological innovation or display effects.


   This also shows that on the basis of solving the problems of indoor use and usability, the development of small-pitch 利来w66老牌ag旗舰 has entered the stage of providing higher product reliability and visual experience. COB packaging is one of the most critical technical directions.


      Changchun Xida Electronics is one of the main forces to promote the development of flip-chip COB small-pitch display. It is reported that Hida Electronics' sales of COB display in 2018 has reached 280 million. In the industry's sluggish environment, it has continued to grow substantially against the trend. Currently, the monthly COB display has reached hundreds of square meters.

图片10.png


   SMD products, the lack of traditional packaging methods   

      利来w66老牌ag旗舰 products packaged in SMD (surface mount technology) are upstream lamp manufacturers that package lamp cups, holders, wafers, leads, epoxy resins, etc. into lamp beads of different specifications. Downstream display manufacturers use high-speed placement machines to solder the bead to the board with high-temperature reflow soldering to create display units with different pitches.

图片11.png

SMD small pitch 利来w66老牌ag旗舰 PCB board cross section icon


      As the first generation of small-pitch 利来w66老牌ag旗舰s, SMD small-pitch 利来w66老牌ag旗舰s can be said to have been widely used, and currently occupy a large share of the 利来w66老牌ag旗舰 application market. However, due to the inherent illumination principle of 利来w66老牌ag旗舰 products and the insufficiency of SMD packaging technology, SMD small-pitch 利来w66老牌ag旗舰s also show obvious shortcomings in long-term market applications.


   ① Dead lights, bad lights. The 利来w66老牌ag旗舰 dead light directly affects the display effect of the screen, and the small-pitch 利来w66老牌ag旗舰 with SMD packaging technology is very easy to produce dead light and bad light during use.


   This is first because SMD small-pitch 利来w66老牌ag旗舰s need to be soldered to the board with high-temperature reflow soldering (240-270 degrees Celsius) during the production process. In high-temperature reflow soldering, the brackets, substrates, and rings in the lamp bead are used. Oxygen resin and other materials have different expansion coefficients, which are prone to gaps, which cause the lamp bead to be in a "sub-health" state at the factory.


   Secondly, with the SMD packaging technology, the exposed light pad of the 利来w66老牌ag旗舰 is easily oxidized, causing water vapor to invade the internal chip of the 利来w66老牌ag旗舰. The long-term operation under the action of water and oxygen causes an electrochemical reaction inside the wick, and a dead lamp and a "caterpillar" phenomenon appear.

   In addition, the damage of static electricity to 利来w66老牌ag旗舰 lamp beads can not be ignored. Small-pitch SMD products are electrostatically sensitive, and bare lamp pads are susceptible to static electricity, causing dead lights.


   Generally speaking, the manufacturer will control the dead point rate within the standard value at the factory; however, as the usage time goes on, the dead pixels will accumulate, and the dead point is usually obvious after half a year. How to reduce the dead light rate has become the primary problem to be solved by small-pitch 利来w66老牌ag旗舰s.


图片12.png

Analysis of the causes of SMD bad lights


      ②Poor viewing comfort. In terms of viewing comfort, the human eye will periodically receive light signal stimulation due to frequent refreshing of the 利来w66老牌ag旗舰 screen body, and it will feel uncomfortable for long time viewing and close viewing.


   In addition, there is a “blue hazard” effect. Because the blue 利来w66老牌ag旗舰 has a short wavelength and a high frequency, the human eye directly and long-termly accepts the influence of blue light, which is likely to cause retinopathy.


   ③Gray scale is not good when low light. In outdoor applications, the brightness of the 利来w66老牌ag旗舰 display naturally has an advantage. However, in normal indoor applications, the brightness of the large screen is generally comfortable at around 200 nits for a long time. However, under this brightness, the 利来w66老牌ag旗舰 display will have a gray scale missing, which will affect the image quality. COB products, innovation of small pitch 利来w66老牌ag旗舰


   From the perspective of technological innovation, COB small pitch 利来w66老牌ag旗舰 is the second generation of small pitch 利来w66老牌ag旗舰.


   COB (Chip On Board) is a kind of packaging technology, that is, RGB chips are packaged on a circuit board, and the wafers and leads are directly packaged on the circuit board by silicone resin, thereby eliminating the lamp bead package, patch, and reflow of the SMD package. Welding and other processes have greatly improved the stability and viewing comfort of small-pitch 利来w66老牌ag旗舰 products.


图片13.png

COB small pitch 利来w66老牌ag旗舰 PCB board cross section illustration


       ① More reliable performance. COB small-pitch 利来w66老牌ag旗舰 products without lamp bead packaging, reflow soldering, and patching processes have greatly improved their stability and can effectively avoid the defects of more and more traditional SMD package defects. It has been estimated that the cumulative dot-break rate of small-pitch 利来w66老牌ag旗舰s using COB packaging technology is less than one-tenth of that of SMD technology after about half a year of use.


图片14.png


      ②Watch more comfortable. The high filling factor optical design of COB products has uniform illumination and approximates “surface light source”, effectively eliminating moiré. Its matte coating technology also significantly improves contrast, reduces glare and glare, and is less prone to visual fatigue.


图片15.png


      ③More adaptable. COB packaging technology, no exposed lamp legs, smooth surface without gaps, with moisture, anti-static, anti-bump, dustproof and other functions, the front protection level reaches IP54, avoiding the small-pitch 利来w66老牌ag旗舰 of SMD package due to moisture, static electricity, dust, bump The problem of dead lights and bad lights caused by environmental or human factors.

图片16.png

Comparison of moisture resistance between SMD and COB


      The popularity and application of a new technology, the maturity and recognition of a new product, can not be separated from the test of the market, but also the user experience, COB small-pitch 利来w66老牌ag旗舰 products. As more and more customers go to the Weichuang demonstration hall to experience and feel the COB small-pitch 利来w66老牌ag旗舰, the person in charge of the market has also answered the questions that users and even the whole industry are generally concerned about.


   Is one COB not well maintained?

   The cumulative bad light rate of COB is less than one tenth of SMD. It can be said that “almost no maintenance” is used in one product life cycle. Even if maintenance is required, it can be maintained by the manufacturer's professional and replaced with the display unit. Therefore, no matter whether it is maintenance cost or operational difficulty, there is no problem that COB is more difficult to maintain.


   Is the second COB not good for heat dissipation?

   Compared with the SMD, the COB wick is directly mounted on the PCB, and the COB wick is directly mounted on the PCB, and the heat dissipation area is large, and the heat dissipation is good. Therefore, compared to SMD, COB heat dissipation can be described as "more than nothing."


   Is its three COB consistency affected?

   In this regard, Wistron has solved this problem, and applied for a patent, combined with the special laminating process of Wistron DLP screen to solve the problem of ink color consistency, ensuring the overall wall display effect of COB small-pitch 利来w66老牌ag旗舰 products.


   Based on the advantages of higher stability and more comfortable viewing of COB products, Weichuang has successfully built a number of COB small-pitch 利来w66老牌ag旗舰 projects, covering application scenarios such as public security, energy, power command and dispatch centers, and TV studios. For control room users, the high stability and viewing comfort of the COB is more in line with the long-term display requirements of the control room users. Due to the anti-molybatic characteristics of COB technology itself, it can be said that it has solved a long-term problem of small-pitch 利来w66老牌ag旗舰 application in the broadcasting and TV industry, and has been unanimously recognized by the broadcasting and television studio field.


   It is key to show that the industry provides value to users. With the advent of different packaging technologies, the choice of small pitch 利来w66老牌ag旗舰s is no longer just a matter of distinguishing between different distances. The emergence of COB small-pitch 利来w66老牌ag旗舰 products can be said to provide users with another selection dimension and consideration criteria, and of course, a better choice for stability and viewing comfort.